No Picture
Remodel Kitchen

How to Choose a Bathroom Remodeler

Your bathroom is perhaps the most important room of your house. But most of the time it is neglected. While you decorate your bedroom and dining space, it’s sometimes essential to remodel the bathroom too. This not only adds beauty and enjoyment to your home, but also increases the value of your home if you wish to sell it in future.
However, remodeling your bathroom is not an easy task and can be costly too. You need to consider the flooring, paint, and other essentials like the sink, mirrors, showers, bath tubs and other accessories. If you’re not careful, you could easily end up with a bathroom that’s anything but what you had wanted it to be. So, it is of extreme importance to have a good plan in place before you begin.
Hiring a reputed bathroom remodeler makes a lot of sense in this regard. Not only do you ensure a cleaner and better installation that way, but also good quality accessories and a higher level of satisfaction. Here are the facilities a good company will provide you for bathroom remodeling:
* Easy and quick installation of the Sinks and Mirrors: Perhaps you have already purchased sinks and mirrors by your own. Many companies in the market will refuse to take your project because you haven’t bought the materials from their catalogs. However that should never be a problem with reputed and honest remodeling companies. No matter where you buy the products from, they will make sure that they are installed quickly and easily in the right way.
* Constructing the floors and walls: Regular use will change the surfaces of the tiles and ceramic over time, necessitating their replacement. An experienced service provider will give you an accurate estimate on the time required to finish your project. A bathroom is an absolute necessity in the house and a competent remodeling company will make sure that you are ready to use it again as soon as possible.
* Installing the perfect showers and bath tub: In some cases, the existing bath tub is measured and a new one is fitted over it, for a very quick remodeling. In other cases, the old bath tub is professionally cleaned to make it look like new again. Make sure that your appointed remodeler is taking care of all the scratches, chips, and water stains on the bath tub and the shower area. They will also use non-harmful and non-staining chemicals that both clean and disinfect.…

No Picture
Remodeling Contractors

5 Simple Ways to Remodel Your Bathroom

Many homeowners like to do a bathroom remodel to boost the value of the home that they live in. However, taking on these additional expenses for bathroom remodeling might be something that homeowners hesitate with. There are ways that the homeowners can make a drastic change to update the look and feel of the bathroom without having to completely remodel the bathroom and empty your wallet. Remodeling a bathroom does not have to be an extremely expensive endeavor, it can be easily achieved with some tips on how to change the look and feel of the current bathroom situation within the home.
By changing the lighting in the bathroom, you can give the bathroom a more modern look and feel that pops. You can have more natural light come into the room without having to do an entire bathroom remodel by replacing curtains in the bathroom or removing objects that might be blocking the window. Artificial lighting can be used in the bathroom as well. You can make the bathroom more timeless with stainless steel lighting fixtures. Adding ambient lighting in the shower also makes the bathroom look more luxurious and welcoming. But, consider searching for a remodeling contractor when you have more in depth projects.
Adding mirrors to the bathroom can provide a better look and feel of the bathroom overall. You want a larger sized mirror that shows most of the upper portion of your body. These are easy to install and do not need bathroom remodeling to be done in order to get them in the bathroom.
One of the easiest ways to update how a bathroom looks and feels without a total bathroom remodel is through the color of the bathroom. Since bathrooms are generally the smallest rooms in the home, you may want to add a touch of color. You should think about the shades that you’re choosing. You may want to stay away from darker colors since this might make the room seem smaller, where bright colors such as blues, oranges, and yellows will open it up and make it more welcoming. Paint is inexpensive and can change the feel of your bathroom.
Adding new cabinets and vanities can be done, but this is a more costly fix for the bathroom if you do not know what you’re doing. You may want to think about swapping shelves or other smaller units throughout the bathroom. A lot of times when you are remodeling a bathroom, they will cut these things for you and start fresh. If you’re up for the task, then go for it, but you may want to consider finding a contractor. You could also change the handles and knobs on these things to give them a fresher look without replacing the entire cabinet itself.
When remodeling bathroom, you want to ensure that you also think about changing some of the smaller things such as the toothbrush holder, shower curtain and bath rugs. These can make any bathroom look extremely different and are extremely affordable compared to remodeling the whole bathroom.…

No Picture
Remodeling

Different Woods From Europe

We tend to use woods more from North and South America and Canada, but where else do woods come from? I know a large amount come from Europe, but what woods exactly come from Europe and what are they used for?
Why don’t we start with the hardwoods of Europe, we have (European) Ash, (European) Walnut, (European Sycamore) Maple, English Brown Oak, (European) Beech, (European) Cherry, (European) Plane, (European) Boxwood, (European) Poplar, (European) Horse Chestnut, (European) Sweet Chestnut, (European) Pear, (European) Holly, (European) Hornbeam, (European) Lime, and (European) Willow. Wow that was a mouth load!! These are all European hardwoods that are only native to Europe.
Then there are the Birch, Elm, and Black Locust, these are also hardwood trees in Europe but they are native to both Europe and North America. Birch is used for general timber and plywood, Elm is used often for furniture, and flooring and Black Locust is used primarily for poles, architecture, and furniture. And just as I listed them Birch, Elm, and Black Locust that is the same order of color, Birch being the lightest, Black Locust the darkest and Elm right in the middle.
Now, down to what each of the European native woods are used for, some are very similar so this is where I will section them off for you, as there are soooo many European woods. Beech and Maple are very similar and very important woods in Europe, they are both very hard and durable to wear and tear, and they are also both pale/cream to golden/ivory in color. They are used to build furniture, boats, make hardwood flooring, and also used in making musical instruments. Another extremely important wood of Europe is Oak, which is similar in color to the Beech and Maple just a bit darker, this is also used in furniture and flooring but also for stairs, windows, and doors.
As far as the European Ash, Plane, Boxwood, Poplar, Horse and Sweet Chestnuts, Holly, Hornbeam, Lime and Willow they are all very close in color all ranging from a pale/cream to a light golden brown at darkest. Also, they are all woods grown native to Europe but used for only minor wood projects in the country, like for decorative furniture, veneers, crafting, utensils, musical instruments and sports equipment. Walnut, Pear and Cherry are all a bit darker in color than the others are, these range from the golden coloring to deeper reds but are also used for only the same minor projects in Europe.
As for the softwoods of Europe there’s Larch, Yew, Spruce, Western Hemlock, Silver Fir, and Douglas Fir. All of these softwoods grow in North America as well as Europe except the Silver Fir which is native to the UK and the Larch which grows in North and Central Europe and Russia. These woods tend to be used more for floorboards, plywood, decorative veneers, packaging, and basic construction; these softwoods are not near as durable as the European hardwoods are. Another popular use for many of these softwood trees are to be cut down and decorated as holiday Christmas trees, take a look around and you may notice you have one of them in your own home for the season.…

No Picture
Remodeling Contractors

5 Great Tips To Ensure Proper Installation Of Your Gutters

The gutter system on your house is designed to ensure that rain water is collected and carried away from the house. This ensures that you are protected from lots of issues and problems that are caused by water pooling around the house.
Without them, rain water will erode the soil near the foundation, leak into crawlspace or basement, or even damage the wooden parts of the house. This means that you need to make sure that gutters on your house are installed properly.
There are different types of gutters available in the market and it is wise to consider your location when making any purchase. For instance, if your house is in a wooded area, then you need a covered system to prevent leaves and sticks from clogging the guttering system. To ensure that installation is done professionally and properly, you need to:
1. Hire professionals
Gutters are installed by professionals although some people prefer to do it on their own. However, it is wise to hire the services of professionals because they have expertise and knowledge that is required during installation. If you do it on your own, you might end up causing more harm than good to the roof which will not serve the purpose that it is intended to do. There are lots of home improvement professionals, both available online and offline.
2. Select quality products
You might think that by choosing cheap inferior gutters, you are saving money but it will cost you so much more in future. Quality is important and you should select materials that are able to withstand harsh climatic conditions like strong sunlight. Since there are different types of gutters, look for those that match the style of the house and are ideal for the area. Also, make sure that the gutters you purchase can hold sufficient amount of water.
3. Get the right measurements
Once you have made the decision on the color and type of gutter you want to install, you should take measurements of the house to make sure you have the right measurements. It might be hard for you to get the right measurements and it is wise to consult professional assistance. The house should be measured across it and make allowances for the downspouts.
4. Install a diverter
Once all the gutters and downspouts are installed, you should make sure that a diverter is installed right under the downspout. This ensures that all the water draining from the roof is redirected away from the house. If the water is allowed to pool around the house, it will weaken the structure of the house and the stagnant water poses various health hazards. You can even install underground drain pipes to make sure the water is diverted further away from the house.
5. Do not hold back on installation
Even if you are trying to work with a budget, you should never compromise on the quality of products and professional services that you buy. This will ensure that you have an end product that will serve you for many years which in turn, will save you a lot of money.…

No Picture
Remodeling

Underfloor Heating and Engineered Wood Flooring – What Conditions Are Necessary?

All homes have their own indoor climate which is determined by factors like the amount of moisture in the air (humidity), the temperature, the type of heating and the amount of ventilation. In a comfortable home with slight humidity variation through the seasons, wooden floors react by expanding and shrinking. During warm, humid weather wood expands. During dry weather wood shrinks – this seasonal movement is a normal characteristic of wooden floors and it never stops, regardless of the age of the wooden floor.
This movement of the boards can be significantly reduced by proper acclimatisation and by keeping temperature and humidity levels as even as possible throughout the year. Flooring machined with a bevel will show less evidence of movement than a square edged material.
Indoor air quality is greatly influenced by the temperature and relative humidity of the air, with a relative humidity of between 45% and 60% considered to be the most healthy and pleasant. However, central heating and dry winter air can combine forces to reduce indoor humidity levels to below these recommended levels. The more intensively you use central heating or underfloor heating, the dryer the air becomes and this has a detrimental effect on everything in the house – people, furnishings and floors.
The moisture content of the timber flooring needs to be in equilibrium (i.e. balanced) with the humidity levels of the air in the room. The optimum relative humidity (RH) of the air in a room with timber flooring should be between 45-65% – certainly not lower than 40%. This ensures minimal shrinkage and expansion of the timber.
Following installation, the floor temperature should only be raised very gradually from a low starting point. Ideally, the floor should be a consistent temperature throughout with no hot spots. Large rugs can lead to a build-up of heat and consequent damage to flooring – they should either be removed or selected for compatibility with underfloor heating.
We recommend that you buy a hygrometer and a programmable humidifier / vaporizer and keep a close eye on humidity levels, especially during the cold, dry winter months so that the humidity level does not drop below 40% RH. Relative atmospheric humidity should be maintained between 40% and 65% using the humidifier if necessary.
Temperature control is also important. No timber likes to be over heated and baked dry. The recommended temperature in a room with wooden flooring is between 18 – 24 degrees Celsius – with an absolute maximum surface temperature of 27 degrees Celsius.
The above recommended optimum relative air humidity and temperature levels should be observed at all times. Please look at our website for further information – particularly the facta and figures box on the underfloor heating page (see addresses below).…

No Picture
Remodel Kitchen

A Short Guide to the Pros and Cons of Popular Seagull Deterrents

In coastal regions seagulls can be a persistent nuisance to the upkeep of properties and can cause mess and damage to buildings and their surrounding areas. In Cornwall, south west England, many towns have significant problems due to the high concentration of buildings and people in relatively small places, especially during the summer months. However, there are many ways seagulls can be deterred from congregating around your own property and this article introduces the pros and cons of some key methods.
Wire
Perhaps the best aspect of using seagull wire as a deterrent is how difficult it is to see after it has been installed. This means that if retaining the original aesthetic quality of your building is your priority, wire is probably your best bet to ensure that. Additionally, wire is comparatively cheap (less than A�50 for 100 metres at time of writing), but for it to be as efficient a deterrent as possible your property will likely need to be assessed, and the deterrent installed, by a professional – which will add to your overall cost. Wire is also one of the more humane methods of bird deterrent.
Spikes
Spikes are arguably the best choice for deterring gulls completely and after they are installed all kinds of birds can no longer land at all. Depending, on the area they need to be placed – they are likely the most expensive deterrent (at around A�4 per metre) before adding adhesive costs. However, with the right tools they are fairly easy to install yourself, but are less humane as many animals, domestic or otherwise, run the risk of being impaled. They are also considered to be the most unsightly option available – and perhaps better for business or industrial areas.
Netting
Seagull netting is great for stopping birds nesting under roofs and for keeping areas generally bird-free. Comparatively, the product cost is very cheap (at less than 50p per square metre in some places), but it follows that a considerable amount may need to be purchased in order to ensure complete efficiency. Additionally, netting is a more humane method than spikes, can be installed easily – and in the right context is not too unsightly.
Visual
Visual deterrents can range from shiny tape to replicas of predator birds to simply frighten off real birds. Although the appealing nature of these deterrents, i.e. price, ease of installation, aesthetic quality and how humane they are, are obvious – it is fair to say that seagulls are a little more savvy than pigeons and smaller birds and may be harder to scare. If you are sure that gulls are the primary problem, it is likely you will need to consider another method such as wire, spikes or netting.…

No Picture
Remodeling

Form Meets Function In Decorative Concrete

Concrete has moved far beyond foundations and garage floors. This durable, versatile, and environmentally friendly material can be used to create stunning concrete flooring, counter tops, and sinks, as well as decorative elements both inside and outside the home. Decorative concrete can be made into almost any shape, and enhanced with a wide variety of colors, textures, and surface designs.
There are several reasons to consider incorporating decorative concrete into your home renovation project.
Style
Decorative concrete can look modern, traditional, rustic, formal, or anything else you can imagine. You are truly limited only by your vision and creativity. Take a look at the amazing array of concrete colors and textures available. Custom pieces can blend seamlessly into a design or stand out as a focal point.
Durability
It’s generally no surprise to learn that concrete is a strong, long lasting material. It can withstand the wear and tear a busy and active household subjects their home to. Concrete is also easy to clean helping you maintain a safe environment for your family.
Budget
While decorative concrete can transform the look of a home, it can also be amazingly affordable. Create a beautiful custom patio for an outdoor entertaining area at a much lower cost than laid stone, with significantly less maintenance required as well. Add an epoxy coating to a garage floor creating a whole new space without a large investment.
Whether building a new home or renovating an existing property, decorative concrete is an excellent choice for creating a look that is unique, attractive, and will last a lifetime. Explore the options for concrete counter tops, flooring, sinks, and much more, and imagine what your home could become.…