No Picture
Remodel Kitchen

How to Choose a Bathroom Remodeler

Your bathroom is perhaps the most important room of your house. But most of the time it is neglected. While you decorate your bedroom and dining space, it’s sometimes essential to remodel the bathroom too. This not only adds beauty and enjoyment to your home, but also increases the value of your home if you wish to sell it in future.
However, remodeling your bathroom is not an easy task and can be costly too. You need to consider the flooring, paint, and other essentials like the sink, mirrors, showers, bath tubs and other accessories. If you’re not careful, you could easily end up with a bathroom that’s anything but what you had wanted it to be. So, it is of extreme importance to have a good plan in place before you begin.
Hiring a reputed bathroom remodeler makes a lot of sense in this regard. Not only do you ensure a cleaner and better installation that way, but also good quality accessories and a higher level of satisfaction. Here are the facilities a good company will provide you for bathroom remodeling:
* Easy and quick installation of the Sinks and Mirrors: Perhaps you have already purchased sinks and mirrors by your own. Many companies in the market will refuse to take your project because you haven’t bought the materials from their catalogs. However that should never be a problem with reputed and honest remodeling companies. No matter where you buy the products from, they will make sure that they are installed quickly and easily in the right way.
* Constructing the floors and walls: Regular use will change the surfaces of the tiles and ceramic over time, necessitating their replacement. An experienced service provider will give you an accurate estimate on the time required to finish your project. A bathroom is an absolute necessity in the house and a competent remodeling company will make sure that you are ready to use it again as soon as possible.
* Installing the perfect showers and bath tub: In some cases, the existing bath tub is measured and a new one is fitted over it, for a very quick remodeling. In other cases, the old bath tub is professionally cleaned to make it look like new again. Make sure that your appointed remodeler is taking care of all the scratches, chips, and water stains on the bath tub and the shower area. They will also use non-harmful and non-staining chemicals that both clean and disinfect.…

No Picture
Remodel Kitchen

A Short Guide to the Pros and Cons of Popular Seagull Deterrents

In coastal regions seagulls can be a persistent nuisance to the upkeep of properties and can cause mess and damage to buildings and their surrounding areas. In Cornwall, south west England, many towns have significant problems due to the high concentration of buildings and people in relatively small places, especially during the summer months. However, there are many ways seagulls can be deterred from congregating around your own property and this article introduces the pros and cons of some key methods.
Wire
Perhaps the best aspect of using seagull wire as a deterrent is how difficult it is to see after it has been installed. This means that if retaining the original aesthetic quality of your building is your priority, wire is probably your best bet to ensure that. Additionally, wire is comparatively cheap (less than A�50 for 100 metres at time of writing), but for it to be as efficient a deterrent as possible your property will likely need to be assessed, and the deterrent installed, by a professional – which will add to your overall cost. Wire is also one of the more humane methods of bird deterrent.
Spikes
Spikes are arguably the best choice for deterring gulls completely and after they are installed all kinds of birds can no longer land at all. Depending, on the area they need to be placed – they are likely the most expensive deterrent (at around A�4 per metre) before adding adhesive costs. However, with the right tools they are fairly easy to install yourself, but are less humane as many animals, domestic or otherwise, run the risk of being impaled. They are also considered to be the most unsightly option available – and perhaps better for business or industrial areas.
Netting
Seagull netting is great for stopping birds nesting under roofs and for keeping areas generally bird-free. Comparatively, the product cost is very cheap (at less than 50p per square metre in some places), but it follows that a considerable amount may need to be purchased in order to ensure complete efficiency. Additionally, netting is a more humane method than spikes, can be installed easily – and in the right context is not too unsightly.
Visual
Visual deterrents can range from shiny tape to replicas of predator birds to simply frighten off real birds. Although the appealing nature of these deterrents, i.e. price, ease of installation, aesthetic quality and how humane they are, are obvious – it is fair to say that seagulls are a little more savvy than pigeons and smaller birds and may be harder to scare. If you are sure that gulls are the primary problem, it is likely you will need to consider another method such as wire, spikes or netting.…

No Picture
Remodel Kitchen

Retail Flooring – Key Considerations

The retail environment is a difficult one to design for. High volume traffic in and out of a store means that practicality must a strong consideration in any designer’s mind. However, most retail stores thrive by creating a strongly defined brand, rather than strictly selling products. The design of a retail space can actually have quite an impact on the success of the shop, and ultimately, its profits. We look at how to blend the practical and aesthetic considerations for retail flooring.
The Retail Branding Environment
Most retail stores would stay in best shape when designed with beautiful counters, tiled floors, and unscratchable stainless steel fittings. However, without the distinction of image (which is actually what draws consumers to one retail store over another), price would be the only distinguishing factor. We’d soon end up with a monopoly in every retail sector! Store design materials need to be chosen for their potential to create a unique environment – and when it comes to retail flooring, carpet tiles are the medium that offers the greatest number of avenues for customisation.
Customer navigation
Every retail store is set out differently – some with aisles, some with scattered stand-alone displays, some with an empty centre and products around the walls; any combination or permutation of these is possible. Carpet tiles offer the opportunity to help direct customers around the store, without saying a word. Carpet tiles can also be used alongside hard flooring to distinguish particular areas. Strong or contrasting colours in shop carpet can highlight walkways, and draw particular attention to specials racks or new season items.
Maintain a fresh new look for longer
The look of a retail environment reflects strongly on the customer’s perceived value of the products. Using commercial carpet tiles in retail interior design means that the high traffic areas can be replaced as needed, creating a fresh look with only a fraction of the cost of replacing the entire floor.
Occupational Health and Safety Issues
OHS is always a consideration for interior designers, as owners and facility managers have it at the forefront of their minds. Vinyl or wood flooring, and especially tiles, create a vastly increased risk of either customers or staff injuring themselves from slips and falls – and increasing the potential for damage when it does happen. For insurance and liability purposes, carpet tiles are an excellent choice.
Carpet tiles also create vastly improved air quality in retail stores, compared with hard flooring. Carpet tiles help trap dust and allergens until they can be safely vacuumed away; hard flooring means that allergens continually circulate.
Noise absorption and underfoot comfort
When a customer steps into the retail environment, they need to feel that they have the space to comfortably explore the range. One component of that feeling of space is the amount of ambient noise in a store. Carpet has been shown to be ten times more effective than any other flooring type in reducing airborne noise.
The staff in a retail environment will be spending much of their time on their feet, also. The underfoot comfort that shop carpet provides can help preserve both health and a feeling of wellbeing for retail staff.…

No Picture
Remodel Kitchen

How to Install Wood Floors

If a plank wood flooring or traditional strips of wood are laid on the sub floor and then it requires finishing for completion of the flooring. However, newer pre-finished wood strips are also available in the market, and do not require any finishing. In case of installation of wood floors were to be done professionally in that case any of the two options could be opted for, however if the “do-it-yourself” option is chosen then it is better to go with the finished planks as it can leave marks in the hands of an amateur. However, it is advised that professionals should be allocated for this job.
However let us first discuss the steps to installing wood floors.
Step one:
Calculation of surface area
Take measurements of the entire place which needs to be covered with flooring. Moreover normally the length is taken alongside the longest wall and for a bigger area possibly the direction alongside where the traffic moves the maximum. The purchase of the flooring needs to be done with the square footage keeping the wastage component in mind. Moreover, acclimatize the wood planks and allow it to get used to the property’s humidity level.
Step two
Prepare the sub floor
Clear and surface the entire floor which will be floored. Moreover, cover the sub floor with a thick layer of asphalt felt. Spacers need to be put alongside the wall for provision of expansion.
Step three
Trimming of door casing
All the bottoms of doors as well other areas need to be trimmed such that the flooring can slip easily under the door. An underlayment along with the flooring needs to be kept as a provision.
Step four
Start laying the first course
The longest or the widest planks will be for the first row. The first row then needs to be face nailed through the plywood of the sub floor.
Step five
Laying the remaining course
The next two rows need to be blind nailed. Moreover while installing the second row and each row thereafter a short piece of flooring needs to hammered and tightened against the previous row. The end joints should be wider than possibly 6 inches and the joints should not be over those of the sub floor.
In case if the surface area to be floored is a large one then, a flooring nailer needs to be used after the first three rows. This is to avoid scratching or damage to the floor. On reaching the last ledge, a pry bar and a block needs to be utilized to tightly drill the planks into position. In case of any change in level while the new flooring, a reducer strip needs to be installed which is rounded or beveled which fits in smoothly. On the other hand it can be butted against the grooves or the edges as well.
Step six
Finishing
Lastly, the baseboard molding needs to be reinstalled. Moreover the spacers against the walls need to be removed and the extras need to be trimmed for neatening of the entire flooring.
Tips:
• The life of the wood floors is usually anything between 10-25 years. This is dependent on the maintenance by the individual. Apart from the regular cleaning and dusting, various solutions and pastes are available for polishing and maintenance.…

No Picture
Remodel Kitchen

Overhead Garage Storage Systems

Do have a difficult time trying to find the items that you need in your garage? There may be a lot of useful tools and gadgets hiding in there, but it may be almost impossible to find what you need at the time that you need it. I know that I have even found myself going out to the hardware store to by a tool that I know I have, just so I don’t have to go and search for it! Getting your this useful area organized should be on your list of things to do this spring, and putting together a bit of a plan is a good way to make sure that your project doesn’t fall by the wayside this year. It makes for a great weekend project, especially while the weather is still cool this time of year, and you’ll find that it was indeed time well spent when you’re able to locate a tool, piece of lawn equipment or a sporting good quickly and without the usual hassle.
Hand and power tools, lawn equipment and bicycles are all examples of the items that we commonly look to store in our garages, and as it is actually one of the largest rooms in our home, with proper organization you will find that there are so many more household items that you can store. This will free up room inside of your home, creating space for the items that we tend to use on a more frequent basis. You’ll find that when your project is complete and the space is properly utilized, you will be able to store everything from surplus food to toys and games.
With today’s garage storage units, cabinets and organizers you’ll be able to store just about anything that you might normally store in your closet, attic or basement. With a well-designed storage system you will be able to keep your items safe and easy to access, with a place for nearly everything.
One area in particular that is often ignored for storage purposes is the overhead space. You can easily take advantage of an empty ceiling simply by adding an overhead garage storage system. This productively utilizes a large amount of space for storing seasonal items and bulky things that may normally be difficult to find a place for such as tents, kayaks and other heavy sporting equipment. Building a system like this can be as simple as a quick do it yourself set-up, or there are a wide variety of ceiling storage systems on the market that are designed to be quick and easy to install, while being durable and easy to maintain and access. This systems are generally designed to be suspended from the ceiling joists or rafters.
The ceiling-mounted units come in a number of different weight capacities and sizes. Most of these units are made to be adjustable, as their tends to be a great number of variations between an open garage door and the ceiling from house to house. Once installed and properly organized, your new system will provide you and your family with much needed extra space so that you can create an indoor work space or maybe even do what your garage was actually built for – parking your car inside of it!…